Leveraging Digital Transformation for Sustainable Manufacturing Production
Article Sidebar
Main Article Content
Abstract
Digital transformation in the manufacturing industry has significantly enhanced efficiency, productivity, and sustainability. This article synthesizes findings from 18 scholarly journals on the application of digital technologies, including management information systems, process automation, and quality digitalization. The implementation of the Software Development Life Cycle (SDLC) in designing a material fulfillment system for minibus production has been shown to reduce delays and improve coordination. Technologies such as the Internet of Things (IoT) and robotics accelerate production, increase capacity, and lower workplace accident rates. Android-based occupational health and safety (OHS) systems have improved workers’ awareness and compliance with safety protocols. The adoption of renewable energy sources, such as solar and wind power, reduces conventional energy use and carbon emissions, supporting environmentally sustainable manufacturing. However, challenges remain, including limited technological infrastructure, poor system integration, and low digital literacy among workers. Successful digital transformation requires not only technical readiness but also organizational preparedness, targeted human resource training, and sustained managerial support. A collaborative, gradual approach—aligned with each unit’s readiness—ensures effective technology integration without disrupting productivity. Regular evaluations of digital systems are essential to verify measurable positive impacts. Ultimately, digital transformation in manufacturing is not merely a technical upgrade but a strategic shift toward cultural change and data-driven decision-making.
Downloads
Article Details
How to Cite
References
J. N. C. Gunawan, Y. Hadi, and N. K. Putrianto, “Penerapan System Development Life Cycle untuk Perancangan Sistem Pemenuhan Material pada Proses Produksi Minibus (Studi Kasus pada Departemen Perlengkapan Karoseri PT X),” Jurnal Tekstil: Jurnal Keilmuan dan Aplikasi Bidang Tekstil dan Manajemen Industri, vol. 7, no. 1, pp. 69–80, Jun. 2024, doi: https://doi.org/10.59432/jute.v7i1.96.
A. Saputra, “Analisis Kinerja Sistem Manufaktur Berkelanjutan: Integrasi Teknologi Energi Terbarukan Dalam Proses Produksi,” Jurnal Teknik dan Teknologi Tepat Guna, vol. 3, no. 1, pp. 13–18, Feb. 2024, doi: https://doi.org/10.62357/j-t3g.v3i1.393.
B. Rinaldi and I. Ikhwan, “Inovasi Teknologi Tepat Guna Dalam Optimalisasi Sistem Manufaktur Dan Proses Produksi,” Jurnal Teknik dan Teknologi Tepat Guna, vol. 1, no. 3, pp. 106–113, Oct. 2022, doi: https://doi.org/10.62357/j-t3g.v1i3.391.
Y. Erdani and R. A. Gumadi, “Implementation of Automatic Particle Counter for Hydraulic Oil Condition Monitoring”, JOKI, vol. 16, no. 2, pp. 95-103, Sep. 2024. doi: https://doi.org/10.5614/joki
S. B. Bhaskoro, H. Supriyanto, and S. Falah, “Sistem Identifikasi Jumlah Produk Berbasis Pengolahan Citra dengan Algoritma YOLO pada Proses Pengepakan Industri Manufaktur,” JTRM (Jurnal Teknologi dan Rekayasa Manufaktur), vol. 6, no. 1, pp. 13–28, Jun. 2024, doi: https://doi.org/10.48182/jtrm.v6i1.114.
P. Mutiara, “PERHITUNGAN BREAK EVEN POINT PADA PERUSAHAAN MANUFAKTUR KAYU”, jsti, vol. 20, no. 02, pp. 161–165, Jan. 2024. doi: https://doi.org/10.59637/jsti.v20i02.368
Muhammad Miftahul Abid, “Analisis Kestabilan Proses Manufaktur Part Body Mobil,” G-Tech, vol. 7, no. 2, pp. 464–473, Mar. 2023, doi: https://doi.org/10.33379/gtech.v7i2.2034.
Septian Sugestyo Putro and S. Santoso, “DESAIN KONSEPTUAL DIGITALISASI MANAJEMEN MUTU PADA INDUSTRI FMCG,” MIX JURNAL ILMIAH MANAJEMEN, vol. 11, no. 2, pp. 147–162, Oct. 2021, doi: https://doi.org/10.22441/mix.2021.v11i2.001.
Nur Jihan Salsabiila, Ayu Rizky Nurlaili, H. D. Septianti, A. T. Okweningtyas, and Dwi Oktavianto Wahyu Nugroho, “Aplikasi Prediksi Kebangkrutan Menggunakan Metode Altman Z-Score pada Perusahaan Manufaktur Sektor Barang Konsumsi,” Jurnal Sains dan Seni ITS, vol. 11, no. 1, pp. D1–D7, Feb. 2022, doi: https://doi.org/10.12962/j23373520.v11i1.62541.
A. A. Setiyawan, N. R. Hidayat, and N. Syamsi, “Analisa Sistem Pendukung Keputusan untuk Manajemen Operasi Rantai Pasokan,” ADI Bisnis Digital Interdisiplin Jurnal, vol. 2, no. 2, pp. 7–12, Sep. 2021, doi: https://doi.org/10.34306/abdi.v2i2.488.
M. W. Rezkita and Y. Kurniawan, “SOFTWARE REQUIREMENTS SPECIFICATION SISTEM INFORMASI MANAJEMEN PERUSAHAAN MANUFAKTUR DENGAN STANDARD ISO/IEC/IEEE 29148:2018,” Kurawal - Jurnal Teknologi, Informasi dan Industri, vol. 5, no. 1, pp. 1–15, Mar. 2022, doi: https://doi.org/10.33479/kurawal.v5i1.547.
M. S. N. Afif and S. Sudarto, “Penerapan Konsep Lean untuk Meningkatkan Operasi Warehouse di Industri Manufaktur,” Operations Excellence: Journal of Applied Industrial Engineering, vol. 14, no. 1, p. 57, May 2022, doi: https://doi.org/10.22441/oe.2022.v14.i1.043.
Febriand Yesaya, Dhian Nur Rahayu, and Asep Samsul Bakhri, “Aplikasi Pembelajaran Keselamatan dan Kesehatan Kerja (K3) Menggunakan Metode Berbasis Android Pada PT.Yangtze Optics Indonesia,” Dirgamaya: Jurnal Manajemen dan Sistem Informasi, vol. 2, no. 1, pp. 40–51, 2022, doi: https://doi.org/10.35969/dirgamaya.v2i1.244.
Ibnu Khoirul Anaam, T. Hidayat, Ridwan Yuga Pranata, Hamid Abdillah, and W. Putra, “Pengaruh trend otomasi dalam dunia manufaktur dan industri,” Vocational Education National Seminar (VENS), vol. 1, no. 1, 2022, Accessed: Dec. 26, 2022, url: https://jurnal.untirta.ac.id/index.php/VENS/article/view/15784
Riki Afriansyah, “Sistem Informasi Manajemen Aset Politeknik Manufaktur Negeri Bangka Belitung,” TeIKa Jurnal Teknologi Informasi dan Komunikasi, vol. 12, no. 02, pp. 135–146, Oct. 2022, doi: https://doi.org/10.36342/teika.v12i02.2918.
N. Purwandari, “PERANCANGAN SISTEM INFORMASI ABSENSI PEGAWAI PADA PERUSAHAAN MANUFAKTUR PRE-SERVER BERBASIS DESKTOP,” Jurnal Sistem Informasi Bisnis (JUNSIBI), vol. 2, no. 1, pp. 1–10, Apr. 2021, doi: https://doi.org/10.55122/junsibi.v2i1.208.
A. Firdaus, I. W. Chrisstyadi, V. A. Oktaviyanti, S. D. Lastiyono, H. M. Fikriyaddien, and A. Pakarbudi, “Perencanaan Strategi Sistem Informasi dan Teknologi Informasi Pada Perusahaan Manufaktur Menggunakan metode Ward dan Peppard (Studi Kasus : PT. ABC),” Prosiding Seminar Nasional Teknik Elektro, Sistem Informasi, dan Teknik Informatika (SNESTIK), vol. 1, no. 1, pp. 241–248, Jun. 2021, doi: https://doi.org/10.31284/p.snestik.2021.1815.
Awang Andhyka, Rizky Aditya Nugroho, and I. Nur, “Penerepan Metode Waterfall Dalam Sistem Informasi Manufaktur Pada Usaha Fitria Konveksi,” Prosiding Seminar Nasional Sains dan Teknologi Terapan, vol. 0, no. 0, 2022, Accessed: May 03, 2025, url: https://ejournal.itats.ac.id/sntekpan/article/view/3650